Power harrow tines
Part number K2500090
We are proud to provide you with a complete selection of tillage wear parts specifically designed for your KUHN agricultural equipment. Many wear parts are available for your powered or non-powered tillage equipment. Whether it is tines for power harrows, spades and tines for rotary tillers, or discs and tines for cultivators, we understand the crucial importance of choosing the right tools suited to each type of soil and crop. At KUHN, we are here to support you in your tillage by offering you high-quality original parts. By choosing our original KUHN parts, you are opting for durability, performance and optimal efficiency in the field!
Whether you need power harrow tines, power tiller blades and tines, or discs and tines for stubble ploughs, KUHN is at your side in your tillage jobs.
The design of power harrow tines (twisted and bevelled) is ideal for crumbling the land, and at high working speeds if required. Power harrow tines are sometimes called blades.
Our power harrow tines meet the precise specifications for KUHN wearing parts that are perfectly adapted to KUHN machines. When you choose a KUHN tine, you are sure of getting a high-quality and a wear-resistant part that is much less likely to break.
Tine replacement is easy with the FAST-FIT quick knife change system. It takes just a few minutes to change all the tines on a machine.
Our power harrow tines meet the specifications defined specifically for wearing parts and are perfectly suited to KUHN machines. Designed and developed by KUHN, cutting and folding are crucial steps which ensure the correct shape of the blade. By choosing a KUHN power harrow tine, you have the certainty of choosing a quality part, resistant to wear, and thus limiting the risk of breakage.
Our power harrow tines also come in different carbide versions:
Find out more about carbide parts
Discover all the range
En savoir plusThe shape of the Optimix tine (angled, pointed, non-bevelled) is perfect for working unploughed land, as the angle of attack makes soil penetration much easier.
We recommend OPTIMIX tines for seedbed preparation following stubble cultivation or soil loosening as well as for working pastures. The shape and « attack » angle of the tines provides two results:
Long tines work the land deep down. They are ideal for potatoes. There are also long tines with DURAKUHN technology.
Tines are held in place by means of a highly resistant connecting piece in forged steel. The connecting piece is locked in place by an automatic clip placed under the tine holder and very easily accessible.
A protective device is integrated into the holder to prevent damage or accidental loosening of the clip.
Wearing parts, casing, bearings, and tine holders all form a compact and very robust unit. In addition, conical roller bearings and one-piece cast-iron housing reinforce the drive chain to make it even more powerful.
Which tines is best to your working conditions?
Rendez-vous sur la page dédiée aux dents de herses rotatives !
Know morePower tillers have many wearing parts. That’s why it’s important to choose the part to suit your needs. Choosing the right part means choosing high-performance and safety for your farming operations.
Different blade profiles make up the range of parts for tillage tools:
CULTIPLOW tines have a large surface area in contact with the soil. The left and right angles of the tines provide good soil levelling by moving the soil from side-to-side.
They are also available with the EASY-FIT system which means that each tine can be removed and fitted again with one single attachment bolt.
CULTITILLER rotor tines provide maximum cover of the worked area as well as significant penetration. They are ideal in wet conditions and rocky soils.
The “leading” position of CULTITILLER rotor tines lifts and cuts. Left and right-angled tines provide good soil levelling by moving the soil from side-to-side.
The Fast-Fit system for tine attachment, available with forged and angled models, is exclusive to KUHN. Secured with a single lynch pin, tines are replaced and perfectly secured in just a few minutes.
Some blades are made from boron steel which is treated then coated with tungsten carbide.
Check out all our carbide blades
Know moreThe discs are tilted in relation to forward travel and verticality.
The angle of attack of the discs gives them great soil-penetration capacity. The shape of the discs enhances intensive soil-crop residue mixing. 6mm thick discs give a 20% longer life when compared to 5mm discs.
There is a wide choice of wear parts available for stubble cultivators. From the 50mm point for effective soil cracking, to the goose foot share for shallow stubble cultivation, not forgetting point and wing shares for medium-depth work. Many configurations are possible to meet the challenges of every plot.
Points, wings, and goose foot shares are also available with DURAKARB technology which increases the service life of the part by up to 8 times, depending on the model.
Find out more about carbide parts for driven tillage tools
Know moreSpare parts are very important for stubble cultivators and cultivators. Whether you need points, shares, wings, or discs, choosing the right tillage part is one of the key ingredients to growing a successful crop.
Different carbide parts are available for your stubble cultivator and your cultivator.
Find out more about carbide parts for non-driven tillage tools
Know moreFind all the parts and the catalogue directly on MyKUHN
Subscribe quickly and for free!
Go to MYKUHN