3100 Series Reel Mixers

3130_Sil.png

Time-Tested Design

KUHN Knight 3100 Series Reel Auggie® mixers offer the same quality mixing performance and dependable service that has been their hallmark. The time tested, standard reel and auger design provides a fast, thorough mix for a fluffy, palatable ration.

Contact your dealer for pricing

Find a dealer near you

KUHN Knight 3100 Series Reel Auggie® mixers offer the same quality mixing performance and dependable service that has been their hallmark. The time tested, standard reel and auger design provides a fast, thorough mix for a fluffy, palatable ration. Quality components and a rugged design help ensure reliability and long life. These mixers are available in trailer, truck and stationary models with capacities ranging from 150 to 200 ft³. These machines also offer a low standard loading height for easy loading with skid steers.
MAW_3130_Action_01.jpg

Your benefits

The Reel Advantage

3130Reel_Illus.png

Gentle, Thorough Mixing

The Reel Auggie® mixer blends by gently lifting and tumbling all feed ingredients. This produces a fluffy, more palatable ration that promotes increased consumption and better herd health.

The gentle tumbling action of the large-diameter reel works together with the two side blending augers to produce end-to-end and side-to-side mixing action. The reel design eliminates much of the force and pressure inherent to most other mixer designs. This results in lower horsepower requirements, reduced machine wear and less feed breakdown.

Consistent Mixing and Discharge

KUHN Knight reel mixers provide a consistent mix, even with small batches, for a balanced ration from beginning to end. Their quick, even discharge with a more complete cleanout helps save time and maximizes efficiency.
3130_Action_04.jpg

Simple Feeding

With a high discharge point, these mixers allow for the use of a simple slide tray in most feeding situations. The long tray makes it easy to feed deeper into most bunks while preventing feed loss from the wind. This dependable, low-cost option also results in less maintenance.
3130_Action_02.jpg

Built to Last

3130_Action_01.jpg

Sturdy Box Construction

Sturdy end panels, combined with heavy-duty reel and auger hoppers, lengthen machine life. The upper and lower shear angles strengthen the mixer box, improve end-to-end mixing and increase hay processing efficiency. The large door opening allows for fast discharge.

Heavy-Duty Undercarriage

The rectangular tube frame construction, with steel bumper, provides strength, reliability and added unit protection. Large-diameter spindles provide optimum strength and durability. The adjustable and reversible clevis hitch adapts to different drawbar heights.
3130_Static_02.jpg

Dependable Drive

The dependable, heavy-duty roller chain drive runs in oil and has spring-loaded, self-aligning poly tighteners for long life. Final drive shafts and sprockets are splined for strength and serviceability.
3100_OilBath.jpg

Auger & Reel Bearings

Self-aligning bearings are mounted on the outside of the mixer chamber for easy service and extra life. Polyethylene seals help prevent bearing contamination.

Nylon reel bearings, with polyethylene seals, provide simplicity, long-life and help prevent oil bath contamination.
3100_AugerBearings.jpg

Tailor Your Machine

3130_Action_02.jpg

Multiple Discharge Options

To best suit your feeding needs, you can choose from a slide tray, chain and slat conveyor, or a 3-auger discharge to be equipped on your 3100 Series mixer.

Slide Tray

The high discharge point of the Reel mixers allows use of the simple, dependable, low-cost slide tray in most applications. It has simple hydraulic controls and the long discharge tray reaches deeper into bunks to prevent feed loss from the wind. Magnets are standard on slide tray.

Chain and Slat Conveyor

Rugged chain and slat conveyor options provide the ultimate in durability and long life. Heavy-duty components ensure reliable service and multiple conveyor length options offer unmatched flexibility to match different feeding situations.

3-Auger Discharge

The 3-auger discharge allows adjustment for feeding into higher bunks. It has a simple, hydraulic drive that provides smooth, even discharge. Long lasting, poly chute liners help prevent rust and limit wear. The 3-auger discharge comes standard with fixed tip-off and built-in magnets.

Trailer, Truck & Stationary Models

To suit your operation’s needs, KUHN Knight 3100 Series mixers are available in trailer or truck-mounted or configurations.

Trailer models are the most popular configuration as they are the most economical and versatile. Being detachable allows the tractor to be used elsewhere on the farm when not in use for feeding.

Truck-mounted models are a suitable option for those that have to feed cows at several different locations, with large travel distances. This option allows a feeder to quickly get from the mixing location to the feed bunk and back again.

Whether mixing wood chips or a ration for your livestock, KUHN Knight 3100 stationary mixers are ideal for maximizing feeding efficiency and mixer throughput on any operation. Stationary mixers are perfect for producers with centralized feed storage and multiple mixers running throughout the day. By incorporating centralized mixing, one loader operator is often able to keep multiple mixers constantly running, greatly increasing mixing capacity and reducing labor. Also, with the addition of delivery boxes, the mixers do not experience the downtime from driving location to location, and in turn do not receive the additional stress which can be seen from constant travel.
3100_multipleconfigurations.jpg

Equipment

3130_Action_02.jpg

Specifications

CAPACITY
 
Capacity
Maximum Net load
3115 TRAILER 3120 TRAILER 3115 STATIONARY 3120 STATIONARY 3120 TRUCK
147 ft³ (4.2 m³) 216 ft³ (6.1 m³) 147 ft³ (4.2 m³) 216 ft³ (6.1 m³) 216 ft³ (6.1 m³)
4,410 lbs (2,000 kg) 6,480 lbs (2,939 kg) 4,410 lbs (2,000 kg) 6,480 lbs (2,939 kg) 6,480 lbs (2,939 kg)
MIXER DIMENSIONS
 
Overall Height
Overall Height - w/Riser Kit
Overall Height - Haypan Up
Overall Height - Haypan Down
Overall Length
Mixing Chamber Length
Overall Width - Mixer Only (No Discharge)
Tread Width
3115 TRAILER 3120 TRAILER 3115 STATIONARY 3120 STATIONARY 3120 TRUCK
77" (196 cm) 84" (213 cm) 64" (163 cm) 64" (163 in) 102" (259 cm)
6" (15 cm) 6" (15 cm)
17" (43 cm) 22" (56 cm) 17" (43 cm) 22" (56 cm) 22" (56 cm)
- 8" (20 cm) - 8" (20 cm) 8" (20 cm)
145" (368 cm) 189" (480 cm) 150'' (381 cm)
84" (213 cm) 120" (305 cm) 84" (213 cm) 120" (305 cm) 120" (305 cm)
88" (224 cm) 88" (224 cm) 88" (224 cm) 88" (224 cm) 88" (224 cm)
82" (208 cm) 82" (208 cm)
MIXING SPECIFICATIONS
 
PTO Drive
PTO Minimum Power Requirement
Reel Speed
Reel Arms
Lower Auger Flighting Diameter
Lower Auger Flighting Thickness - Sectional
Lower Auger Tube - Outside Diameter
Lower Auger Drive Shaft Diameter
Upper Auger Flighting Diameter
Upper Auger Flighting Thickness
Upper Auger Tube - Outside Diameter
Upper Auger Drive Shaft Diameter
Reel Diameter
Reel Driveshaft Diameter
Replaceable Sickle Knives on Upper Auger
Self-Sharpening Knives in Lower Auger Notches
Length - Haypan
Lower Auger Tube - Wall Thickness
Upper Auger Tube - Wall Thickness
Roller Chain Drive
3115 TRAILER 3120 TRAILER 3115 STATIONARY 3120 STATIONARY 3120 TRUCK
540 RPM 540 RPM
45 hp (34 kW) 50 hp (37 kW)
5 RPM 7 RPM 4.5 RPM 5 RPM 7 RPM
4 4 4 4 4
16" (41 cm) 16" (41 cm) 16" (41 cm) 16" (41 cm) 16" (41 cm)
3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm)
4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
2" (5.1 cm) 2 1/2" (6.4 cm) 2" (5.1 cm) 2 1/2" (6.4 cm) 2 1/2" (6.4 cm)
14" (36 cm) 14" (36 cm) 14" (36 cm) 14" (36 cm) 14" (36 cm)
3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm)
4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm) 4" (10.2 cm)
2" (5.1 cm) 2 1/2" (6.4 cm) 2" (5.1 cm) 2" (5.1 cm) 2 1/2" (6.4 cm)
52" (132 cm) 52" (132 cm) 52" (132 cm) 52" (132 cm) 52" (132 cm)
3" (8 cm) 3 1/2" (9 cm) 3" (8 cm) 3 1/2" (9 cm) 3 1/2" (9 cm)
Standard Standard Standard Standard Standard
Standard Standard Standard Standard Standard
84" (213 cm) 96" (244 cm) 84" (213 cm) 96" (244 cm) 96" (244 cm)
1/4" (0.6 cm) 5/16" (0.8 cm) 1/4" (0.6 cm) 5/16" (0.8 cm) 5/16" (0.8 cm)
1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm)
60-80-100 60H -80-100H 50-60-80 60H-80-100H 60H -80-100H
TUB & TRAILER CONSTRUCTION
 
Axle Configuration
Hitch
Hubs
Spindle Diameter - Single Axle / Tandem Axle
Unit Weight
Tongue Weight - % Gross
Weighing System
Door Opening Size
Sidewall Thickness - Auger / Reel
Stainless Steel Side Liner
End Panel Thickness - Front and Rear
Reel Hopper Thickness
Auger Hopper Thickness
Oil Bath Location
Highway Light Kit
3115 TRAILER 3120 TRAILER 3115 STATIONARY 3120 STATIONARY 3120 TRUCK
Single Axle Single Axle Single Axle
Clevis Clevis
8-Bolt 8-Bolt
3 1/2" (6.4 cm) / - 3 1/2" (6.4 cm) / -
3,720 lbs (1,687 kg) 6,173 lbs (2,800 kg) 2,850 lbs (1,293 kg.) 4,809 lbs (2,181 kg) 4,810 lbs (2,182 kg)
18 12
4-point 4-point 4-point 4-point 4-point
20"x16" (51x41 cm) 36"x 20" (91x51 cm) 20"x16" (51x41 cm) 36"x 20" (91x51 cm) 36"x 20" (91x51 cm)
9/64" (0.3 cm) 9/64" (0.3 cm) 9/64" (0.3 cm) 9/64" (0.3 cm) 9/64" (0.3 cm)
7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm)
9/64" (0.3 cm) 9/64" (0.3 cm) 9/64" (0.3 cm) 9/64" (0.3 cm) 9/64" (0.3 cm)
7 GA (0.5 cm) 7 GA (0.5 cm) 7 GA (0.5 cm) 7 GA (0.5 cm) 7 GA (0.5 cm)
1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm)
Front Front Front Front Front
Optional Standard Standard
DISCHARGE DIMENSIONS
 
Discharge Hinge Height
Slide Tray - Transport Width
Slide Tray - Maximum Height
Slide Tray - Maximum Reach
3-Auger Discharge - 24"/36" (61/91 cm) - Maximum Reach
3-Auger Discharge - 24"/36" (61/91 cm) - Maximum Height
3-Auger Discharge - 24"/36" (61/91 cm) - Transport Width
3115 TRAILER 3120 TRAILER 3115 STATIONARY 3120 STATIONARY 3120 TRUCK
31" (79 cm) 36" (91 cm) 50" (127 cm)
99'' (252 cm) 97'' (246 cm) 97'' (246 cm)
19" (48 cm) 26'' (66 cm) 41" (104 cm)
20" (51 cm) 22'' (56 cm) 13" (33 cm)
- 29''/39'' (74/99 cm) 20"/30" (51/76 cm)
- 41''/47'' (104/119 cm) 56"/62" (142/257 cm)
- 108''/112'' (274/285 cm) 108"/112" (274/284 cm)
TRUCK SPECIFICATIONS
 
Cab-Mounted Indicator Mount and Joystick Controls
Steel Rear Bumper
Clearance Light Kit
Mounting
3115 TRAILER 3120 TRAILER 3115 STATIONARY 3120 STATIONARY 3120 TRUCK
Standard
Standard
Standard
Factory Mount Option
STATIONARY SPECIFICATIONS
 
Overall Length - With Motor Mount
Length Reduction - Less Motor Mount
Motor Mount to Center of Discharge Door
Overall Height - with Rails and Scales
Discharge Height - With Rails and Scales
Height Reduction - Less Rails and Scales
Electric Motor Horsepower
Electric Motor RPM
Discharge Door Control
Door Flow Control Plates
Top Guard
3115 TRAILER 3120 TRAILER 3115 STATIONARY 3120 STATIONARY 3120 TRUCK
120" (305 cm) 159" (404 cm)
12" (31 cm) 23" (58 cm)
50" (127 cm) 65" (165 cm)
64" (163 cm) 64" (163 cm)
16 1/2" (42 cm) 18" (46 cm)
7" (18 cm) 7" (18 cm)
7.5-10 hp (5.6-7.5 kW) 10 hp (7.5 kW)
1,800 RPM 1,800 RPM
Manual Manual
Standard Standard
Standard Standard

Media